Starting Problem in Induction Cooker | No Heating Problem of Induction | On-Off Problem in induction

Starting and pot sensing problem of induction 

In this video, we will see how to repair starting problem and pot sensing problem of induction.

starting problem occurred because of smps voltage not being stable in this induction.

It used to turn off automatically as soon as this induction cooker was started. When the induction cooker was opened then there was capacitor damage in it and in SMPS section someone had used regular 4148 diodes instead of 18Volt Zener Diode, after replacing these two parts, the induction cooker started but the pot was not heating in it. There was also the problem of no heating.

The voltage divider resistor in the induction cooker was also open, which had a value of 470k, after replacing this resistor the induction cooktop became fine.

watch the full video on how to repair this fault.

Sometimes, despite everything being normal, there is a problem with auto-off in the induction cooker. Some reasons are given below. 1) Even if the IGBT becomes short between Gate to Source of the induction cooker, the problem of auto-off comes as soon as the induction cooker is turned on. 2) Even if the driver section of the induction cooker does not get 18volt, the problem of auto-off comes in the induction cooker.